Cox .049 production engine/ dual port.

Post all the small engines stuff here. Cox, Wen-Mac, Testors, Spitzy, Wasp, Holland Hornet, Atwood, Aurora, Gilbert, etc.

Moderators: Frank Klenk, SteveM

Cox .049 production engine/ dual port.

Postby viking61 » Sun Jan 31, 2010 9:19 pm

Looking for a used but good complete Cox production engine with at least dual ports. Must be a runner and complete. This is for a project for some home brew mods. No sure starts or broken mess I need a good runner. Want what you want for it and not ask me what its worth. Give total with postage. I was going to get them on ebay but most are single port.
Dan
viking61
 
Posts: 410
Joined: Sat Dec 25, 2004 9:50 am
Location: Tucson,Az.

Postby dedaddy007 » Mon Feb 01, 2010 10:58 am

I have over 100 cox engines of various types in a big box. Are you looking for Baby Bee, Tee-Dee, etc. I need a little more detail to build you one.
dedaddy007
 
Posts: 47
Joined: Sun Jul 06, 2008 7:00 pm
Location: Dallastown, PA

Cox .049 production engine/ dual port.

Postby viking61 » Mon Feb 01, 2010 11:43 am

I am looking for product engine that came in ME-109 stunter. Dual ports. Also they used them in Chipmonk and Viper. No tank just black or red mount with needle valve Or just a matched piston and liner with dual ports.
Thank you for reply
viking61
 
Posts: 410
Joined: Sat Dec 25, 2004 9:50 am
Location: Tucson,Az.

049 ENGINE

Postby JOHN G » Mon Feb 01, 2010 1:59 pm

Dan

Is what you want the engine that was put in the cox stuki

JOHN G
JOHN G
 
Posts: 50
Joined: Sat Jun 26, 2004 6:29 pm
Location: PASADENA MD.

.049

Postby viking61 » Thu Feb 04, 2010 6:26 am

John,
Yes it is very much like Stuka engine but has ywo cylinder ports. I think Stuka only had one.
Dan
viking61
 
Posts: 410
Joined: Sat Dec 25, 2004 9:50 am
Location: Tucson,Az.

Cox

Postby viking61 » Sat May 22, 2010 5:36 pm

All sure starts are dual ported that I have ran across. The Vendors on ebay are ok and reasonable. Coxengines.ca is about the biggest with whats availble.
Dan
viking61
 
Posts: 410
Joined: Sat Dec 25, 2004 9:50 am
Location: Tucson,Az.

Postby chiefss » Sun May 23, 2010 2:30 pm

If you took the piston and cylinder from a sure start and one from a TD, you couldn't tell them apart.

As a matter of fact, I bought a couple dozen sure starts when they were $6.95 and took them apart and sold the piston and cylinders separately. I made more form the plugs than I paid for the engines.

I tried the P/C on a TD 049 and they ran just as strong.
chiefss
 
Posts: 611
Joined: Sun Sep 30, 2007 1:22 pm
Location: Bremerton, WA

Cox dual ports

Postby max hansen » Fri May 28, 2010 8:39 am

Easy to tell a dual intake port Cox by removing the head & looking in the cylinder with the piston at the bottom of the stroke. They will be rounded like the end of your finger. Max H. : :idea:
max hansen
 
Posts: 530
Joined: Sun Feb 16, 2003 10:44 am
Location: huron sd


Return to 1/2A and alike

Who is online

Users browsing this forum: No registered users and 5 guests

cron