Post the general engine topics that here.
Moderators: Frank Klenk, SteveM
by siddf » Thu Mar 12, 2009 4:56 am
I have a Super Cyke that some previous owner has kindly drilled out the mounting lug holes.
I would like to return the holes to their original size by machining small sleeves and press fitting in place.
The only thing is I don't know is the original diameter of the holes for this engine. Can somebody with an unmolested Super Cyke take a measurement and let me know.
Thanks,
David
-
siddf
-
- Posts: 4
- Joined: Wed Jan 15, 2003 10:03 am
- Location: Herefordshire, England
by jaregalbuto » Thu Mar 26, 2009 9:41 am
The Cyke I have has mounting holes that are a snug fit on a 0.115 inch diameter rod.
-
jaregalbuto
-
- Posts: 21
- Joined: Thu Apr 06, 2006 6:46 am
- Location: Georgetown, MA
by chiefss » Thu Mar 26, 2009 3:11 pm
A number 33 drill fits and a #32 drill doesn't. The 33 is .113 and the 32 is .116 inch. The engine is new in the box and never had a mounting screw in it.
-
chiefss
-
- Posts: 611
- Joined: Sun Sep 30, 2007 1:22 pm
- Location: Bremerton, WA
Return to General Engine Tech Talk
Who is online
Users browsing this forum: No registered users and 23 guests