MECOA's Model Engine Forum & Swap Shop
Ask your technical questions on MECOA-K&B products at the bottom of the main page for factory tech help --- If you are joining as a new member, we must activate your account in efforts keep spammers out.
K&B 7.5 IB CARB QUESTION ?
Moderator: SteveM
2 posts
• Page 1 of 1
K&B 7.5 IB CARB QUESTION ?
by ksm73024 » Mon Apr 24, 2006 8:01 am
Hi there, I have a K&B 7.5 IB engine model no. 9181 with a big square carburettor on it that has the hi speed needle in one end & the idle mixture needle in the other end of the barrel.It also has a large velocity stack which is held in with two orings.Is this the right carb for this engine or should it have the carb with mixture disk & remote needle valve? Any help will be appreciated. Regards Craig.
- ksm73024
- Posts: 1
- Joined: Mon Apr 24, 2006 7:28 am
- Location: australia
by MECOA » Mon Apr 24, 2006 6:29 pm
this is the carb you are refering to
http://www.mecoa.com/faq/carb/kbsq/kbsq.htm
the one on the right, although made for the larger engines it was used on some 7.5's and should be okay for your engine.
http://www.mecoa.com/faq/carb/kbsq/kbsq.htm
the one on the right, although made for the larger engines it was used on some 7.5's and should be okay for your engine.
- MECOA
- Site Admin
- Posts: 1095
- Joined: Mon Jun 30, 2003 9:48 pm
2 posts
• Page 1 of 1
Return to K&B Mfg. Engine Tech Questions
Who is online
Users browsing this forum: Google [Bot] and 61 guests